Desktop Liquid Densimeter/Hydrometer (DA-100)

Benchtop Liquid Density Meter/Hydrometer (DA-100)

Benchtop Liquid Density Meter/Hydrometer (DA-100) Key Features:

1. Built-in temperature control, minimal sample requirement, fast operation, and easy to use.

2. Measured density or specific gravity can be converted to concentration values, such as API gravity or Baumé degree.

3. Density (specific gravity), relative density, concentration, etc., can be output to a computer or printer.

4. Built-in pump for drying the measurement cell; optional sample pump (ASU-100) for automatic sampling.

5. Calibration using dry air and pure water, eliminating the need for complex calculation formulas.

Benchtop Liquid Density Meter/Hydrometer (DA-100) Technical Parameters:

Test Substance: Suitable for various liquid samples.

Measurement Principle: U-shaped vibrating tube method.

Measurement Range: 0–3 g/cm³.

Accuracy: 0.001 g/cm³.

Measurement Temperature: 15–40°C, with built-in Peltier temperature control device.

Temperature Accuracy: ±0.5°C.

Temperature Control: ±0.1°C.

Measurement Time: 20–90 seconds.

Sample Requirement: Approximately 1 mL.

Display: LCD screen showing density (specific gravity), relative density, temperature, concentration, and messages.

Sampling Method: Manual syringe injection or optional automatic vacuum pump sampler (ASU-100).

Calibration: Using dry air and pure water.

Output: RS-232C.

Power Supply: AC 100–115 V or AC 220–240 V, 50/60 Hz, 30 W.

Dimensions: 275 (W) × 350 (D) × 165 (H) mm.

Weight: 6 kg.